RLE Falcon EM - Manual (Page 62)

FMS Configuration User Guide: Falcon FMS
48 970 484-6510 www.rletech.com
3-21 EMAIL/DNS
Figure 3-35: Sample FMS E-mail Configuration
The email page allows users to configure the FMS to send notifications via email when inputs are in an
alarm state. The FMS will send one email message per alarm instance to a maximum of eight email
recipients.
Access Type: Specifies whether to send the message through a local network or over a PPP dial-up
connection.
DUN User Name and Password: Only used if PPP is selected. This option specifies the dial-up network
user name and password. Contact your ISP for this information.
DUN Phone Number: The number the FMS dials to connect to the ISP. Contact your IT Department to
obtain this phone number.
DNS Servers: Information provided by your ISP. It is needed to deliver the email message.
Mail (SMTP) Server: Specifies the email server used to receive and send mail.
Mail Sender Address: The address displayed in the “From” field of the email message.
Mail Subject: Displayed in the subject field of the received email messages. Adding
&m inserts the MAC
Address of the FMS into the email subject line. This ensures the email subject is always unique to a FMS.
Mail Recipient (1)–Mail Recipient (8): Specifies the addresses of up to eight email recipients.
SMTP User Name: Used for ESMTP. Use the recommended default setting unless instructed differently
by your IT Department.
SMTP Password: Used for ESMTP. Use the recommended default setting unless instructed differently by
your IT Department.
SMTP Authentication: Used for ESMTP. Use the recommended default setting unless instructed
differently by your IT Department.