RLE Falcon EM - Manual (Page 104)

EIA232 Interface User Guide: Falcon FMS
90 970 484-6510 www.rletech.com
6-3.1 Main Configuration Menu - SC
Typing SC at the command prompt on the Main Menu displays the Main Configuration Menu that lists
all items for system setup and configuration. This menu may be password protected. If it is, the password
must be entered when the
SC menu selection is made. To enter the password, type SC , press the space
bar once, and then type the appropriate password.
Table 6-2: Main Configuration Menu Options (SC)
COMMAND DESCRIPTION FUNCTION
2 IP Configuration
Menu 2 displays the IP Configuration Menu.
4 Factory Menu 4 displays the Factory Menu. This menu provides a means
to change the MAC address and erase the user
configuration stored in Flash memory. This area is
password protected. If you are familiar with MAC
assignments and configuring the FMS, contact RLE
Technologies for the password to this menu.
5 Load/Save
Configuration
Data 5 allows user configurations to be saved and reloaded onto
other FMS units. Windows HyperTerminal application
software may be used to perform the load/save functions.
Before the configuration can be loaded onto other FMS
units, it must be checked for accuracy. Blank spaces or
unwanted characters, such as the “Press to
download the file” text, may be saved into the beginning of
the configuration file. Open the file in notepad and
examine the first few lines. Delete any characters that were
accidentally embedded into the file.
6 Configuration
Password 6 allows the user to password protect the configuration
section of the FMS Firmware. The password can be any
combination of seven numbers and/or characters.
x Exit X exits the Main Configuration Menu and returns to the
Main Menu.
WARNING!!
Once you receive the password for this menu, you assume full responsibility for
the system configuration and proper MAC addressing of the FMS.