RLE Falcon EM - Manual (Page 143)

User Guide: Falcon FMS Technical Specifications
www.rletech.com 970 484-6510 129
APPENDIX I: TECHNICAL SPECIFICATIONS
Power 1U FMS: 24VDC Model: 24VDC (±10%), 1A max. (power supply included); 48VDC Model: 36-72VDC, 0.5A max.
2U FMS: 24VDC Model: 24VDC (±10%), 2.5A max. (power supply included); 48VDC Model: 36-72VDC, 1.25A max.
Inputs
Analog/Digital
Optional
Internal Temperature/Humidity
Keypad
8 Configurable as 4-20mA (12-bit A/D conversion) or Dry Contact NO/NC (<15mA)
±0.5ºF (@ 25ºC), ±4ºF (@ -40º to 185ºF); ±3%RH (@ 20% to 80%RH)
Standard 3x4; 3000VAC RMS optically isolated; 20 User Access Codes (also accessible via phone/DTMF through modem)
Outputs
Relay
Sensor/Accessory
Power
2 Dry Contact, Form C, 1A @ 24VDC, 0.5A resistive @ 120VAC (controllable via user programmable logic)
24VDC (±10%) @ 300mA max. (power for external sensors and/or devices)
Expansion Cards
EXP-A-24
/ EXP-A-48
EXP-C-24
/ EXP-C-48
1U accommodates 1 Expansion Card; 2U accommodates up to 4 Expansion Cards
48V FMS requires EXP-x-48 expansion cards; 24V FMS requires EXP-x-24 expansion cards
12 Analog Inputs (jumper selectable for 4-20mA, 0-5VDC or 0-10VDC) and/or Digital Inputs (non-isolated, individual ground only);
20VAC
24 Digital Inputs, 3000VAC RMS optically isolated (common ground or individual ground)
Communication Ports
Ethernet
EIA232
EIA485
(selectable as EIA232)
Modem
(RJ11 Telco)
10 BaseT, RJ45 connector; 500VAC RMS isolation
DB9 female connector; 9600 baud; 3000VAC RMS optically isolated; 15kV ESD protection
Two-wire half duplex; terminal block (selecting EIA232 switches to DB9 male connector); 1200, 2400, or 9600 baud configurable;
3000VAC RMS optically isolated
V.34bis/33.6 kbps; DTMF capable; PPP-Enabled; FCC Part 68 approved; 1500VAC RMS isolation barrier; 2100V peak surge protection
Protocols
TCP/IP; UDP/IP; ICMP/IP; FTP; NTP
HTTP/HTML;
Telnet
SNMP
SMTP (Email)
Modbus
Modbus/IP
BACnet/IP
Terminal
Emulation
TAP (Pager)
IPv4
1.1/4.0; up to 10 URL links to other IP addressable cameras/devices; webpages comply with Rehabilitation Act of 1973,
sections 504 and 508, US Dept of Education (website accessibility for computer users with disabilities)
V1; MIB-2 compliant; NMS Manageable with Get, Set, and Traps
Supports Client Authentication (plain and login); compatible with ESMTP Servers
RTU transmission protocol; function codes: Slave - 03; master - 01,02,03,04
Modbus Slave; TCP/IP transmission protocol
Conformance Level 1
VT100 compatible
Telocator Alphanumeric Protocol Ver1.8
Alarm Notification
Pager (Modem)
Email (Ethernet, Modem PPP)
SNMP
Traps (Ethernet)
Escalation
15 Text, numeric and/or alphanumeric pager numbers; each Digital and Analog Alarm (HighLimit2 and LowLimit2)
can notify any 5 of the 15 pagers
8 Email recipients; email sent on Alarm and Return To Normal; each Alarm can notify any or all of the 8 email recipients
8 Community Strings
Additional notification to 1 of the 15 pager numbers when the initial page results in a Failure To Acknowledge status
Health Check/Self Monitoring
Communications
Check
Watchdog
Daily page to 1 of the 15 pager numbers; configurable for Time Of Day (HH:MM)
Self resetting; captured in Event Log
Internal Hardware
Real Time Clock
Memory
Battery backed;
± 1.53 min/month accuracy
512K RAM; 128K NVRAM; 64K ROM; 2M Flash
Logging Capabilities
Alarm
Log
Event Log
Web User Access Log
Digital Status Log
Trending of Analog Inputs
Minute
Hour
Day
Last 256 Alarms
Last 100 Events (e.g., Acknowledgement By Code, System Boot, Page Successful, etc.)
Last 100 HTML Accesses (User, Date, and Time)
Last 100 Digital Status entries
244 Entries per time frame, per channel
Every minute, high/low/avg for the last 65 minutes
Every hour, high/low/avg for the last 25 hours
Every day, high/low/avg for the last 7 days
Login Security
Web Browser Access
(Ethernet, Modem PPP)
Terminal Emulation Access (Modem, EIA232 )
1 Administrator plus 7 Users individually selectable for Read Only, Read/Write or Administrator
1 Administrator (password for both Modem and EIA232) plus 1 Read Only (password for Modem only, not EIA232)
Front Panel Interface
Switches
LED
Indicators
Power: 1 (on/off)
Power: 1 green (on/off); Status: 1 red (flashing = boot up, on = alarm, off = normal); Network Link: 1 bi-color (green = active,
red = not active); Network Activity: 1 green; Modem: 3 green (transmit, receive, and off hook), 1 amber (carrier detect)
Operating Environment
Temperature
Humidity
Altitude
32° to 158°F (0° to 70°C)
5% to 95% RH, non-condensing
15,000ft (4,572m) max.
Storage Environment -40º to 185ºF (-40º to 85ºC)
Dimensions 1U FMS: 16.8”W x 1.8”H x 7.9”D (427mmW x 46mmH x 201mmD)
2U FMS: 16.8”W x 3.5”H x 7.9”D (427mmW x 89mmH x 201mmD)
Weight
1U FMS: 6 lbs. (2.72kg)
2U FMS: 10 lbs. (4.54kg
Mounting 1U FMS: Rack mount, or wall mount (brackets required): WMB wall mount brackets (not included)
2U FMS: Rack mount, or wall mount (brackets required): WMB2U wall mount brackets (not included)
Certifications CE; ETL listed: conforms to UL STD 61010A-1, EN STD 61010; certified to CAN/CSA C22.2 STD NO. 1010.1; RoHS compliant