RLE Falcon EM - Manual (Page 35)

User Guide: Falcon FMS FMS Configuration
www.rletech.com 970 484-6510 21
Figure 3-1: Initial Loggin for the FMS
These pre–configurations can be customized through the System link on the Configuration Menu of the
Web interface. To change the FMS IP address, refer to section 2-4 Set FMS IP Address on page 17.
Netscape’s “Smart Browsing” feature complicates use of the FMS Web interface. To avoid complications,
turn off Smart Browsing by following the steps below:
1. In the menu bar at the top of the Netscape browser, click on Edit, then on Preferences.
2. Smart Browsing is a subcategory of the Navigator category. Access Smart Browsing and then click the
box in front of the “Enable ‘What’s Related’ ” option. Eliminate the check mark to disable this option.
3-2 MAIN MENU
To access the FMS Main Menu, type the IP address of the FMS into the location bar of the Web browser.
When the prompt appears, enter the default user name (falcon) and password (none—leave blank).
Figure 3-2: Main Menu/Homepage of the FMS