OpenEye EasyDVR - Manual (Page 79)

30757AC 79
SAVE OR LOAD SETTINGS
The recorders configuration settings can be exported to and imported from a USB storage device.
Save Configuration
1. Connect a USB storage device to the recorder.
2. Press MENU.
3. Select SYSTEM and press ENTER.
4. Select Configuration and press ENTER.
5. Select Export and press ENTER.
6. Select Destination and press ENTER.
7. Select the USB storage device to export to and press ENTER.
8. Press DOWN arrow to change the selection to Yes, and then press ENTER.
9. Select File Name and press ENTER.
10. Use the onscreen keyboard to enter the desired file name (up to 15 characters).
11. When you are finished select OK and press ENTER.
12. Select Export and press ENTER.
13. Press DOWN arrow to change the selection to Yes, and then press ENTER.
Load Configuration
1. Connect a USB storage device to the recorder that contains a configuration export file.
2. Press MENU.
3. Select SYSTEM and press ENTER.
4. Select Configuration and press ENTER.
5. Select Import Configuration and press ENTER.
6. Select the configuration file you want to import and press ENTER.
7. Press DOWN arrow to change the selection to Yes, and then press ENTER.
8. Press ENTER to confirm the configuration load and system restart.
Note This load and restart may take up to 5 minutes, and cannot be aborted or interrupted.