OpenEye EasyDVR - Manual (Page 26)

26
Live Button
Press the LIVE button while in the Search or Backup menus, or in Sequence mode to return to the Live
Display.
Menu Button
Press the MENU button to access the recorder configuration menu; please refer to the Setup section
later in this manual for further details.
Number Buttons
In both Live and Search modes, pressing a number button will display the selected channel full screen.
Number buttons 1~9 will display the corresponding channel; for channels use the 10+ button in addition
to the 0~6 button for the corresponding channel (example: to access channel 14, press the 10+ button
then the 4 button).
In PTZ mode, pressing the channel 1 button will open the presets menu.
When the onscreen number keyboard is displayed, the buttons 0~9 buttons will enter their
corresponding number.
Log Off (key) Button
Press the Log Off button while in Live Display to log off. While in other menu options, the Log Off button
will function similarly to the Exit/Escape button (back one menu screen).
Enter Button
When navigating onscreen menus, the ENTER button is used to choose a menu option or confirm a
selection. The button in the center of the Arrow Buttons also functions as an Enter button.
Exit Button
Press the EXIT button to cancel or exit modes and menu selections.
Arrow Buttons
The arrow direction buttons ( , , , and ) are used to navigate menu items. In some menus the
LEFT and RIGHT arrows are used to move the selection cursor from field to field, while the UP and
DOWN arrows are used to change the value in the selected field.
PTZ Button
Press the PTZ button to enter PTZ mode; please refer to the PTZ section later in this manual for further
details.
Zoom Button
Press the Zoom-Plus or Zoom-Minus while in PTZ mode to control the PTZ camera zoom in and zoom
out.
Focus Button
Press the Focus-Plus or Focus-Minus while in PTZ mode to control the PTZ camera focus in and
focus out.
Sequence Button
Press the SEQ button to start automatic sequencing of cameras; different sequences will cycle through
depending upon the display options selected.