Alarms, Internal buzzer, Per channel configuration – OpenEye EasyDVR User Manual
Page 46: Channel select, Alarm in, Alarm out, Video loss detect
46
ALARMS
Use the ALARMS menu to configure the recorders response to alarm events
Internal Buzzer
Internal Buzzer allows you to enable or disable the audible beep from the recorder when alarm events
occur. Set to On to enable the beep; set to Off to disable the beep.
Per Channel Configuration
Per Channel Configuration allows you to configure alarm events for video loss and alarm inputs and
outputs.
Channel Select
Channel Select allows you to select the camera/alarm channel to modify.
Alarm In
Alarm In allows you to enable or disable the alarm channel. Select N/O for Normal Open, N/C for
Normal Close, or OFF to disable.
Alarm Out
Alarm Out allows you to enable or disable the alarm relay output.
Note
There is only a single alarm relay output.
Video Loss Detect