OpenEye EasyDVR - Manual (Page 38)

38
CAMERAS
Use the CAMERAS menu to configure camera channel settings; including channel name, motion
detection, and PTZ configuration.
Analog Camera Select
Analog Camera Select allows you to select the camera channel to make changes to.
Motion Detection Setup
Detect Config allows you to configure the motion detection settings for the selected channel.
Motion Detect
Motion Detect allows you to enable or disable the motion detection for the recorder.
Detected Area Setup
Detected Area Setup allows you to configure the motion detection grid for the selected channel. By
default all blocks in the 16x12 grid are selected to detect motion.
1. Select Detected Area Setup and press ENTER.
2. Use the arrow keys to move the cursor on the grid.
3. Press ENTER to deselect a block (ignore motion).
4. Press ENTER on an unselected block to reselect it (detect motion.
5. Press SEQ to deselect all blocks.
6. Press SEQ again to reselect all blocks.
7. Press ESC when you complete the configuration of the detection grid.