Ezddns – OpenEye EasyDVR User Manual
Page 56
56
ezDDNS
ezDDNS allows you to fill the Host Name field, and complete the configuration of DDNS settings.
To enable and configure DDNS on your recorder:
1. Select Enable DDNS and press ENTER.
2. Press the DOWN arrow to change the selection to On and press ENTER.
3. Select ezDDNS and press ENTER.
4. Press the DOWN arrow to change the selection to Yes and press ENTER.
Note
A network connection with a connection to the internet is needed for the DDNS update to
connect and complete.
5. The recorder will automatically pull a Host Name, and submit an update to the DDNS server.
6. The DDNS address will also be displayed (you should make a note of this address for future use).
Note
Port forwarding also needs to be configured on the router to allow remote access to the
recorder from an offsite location. For further instruction on this process, visit
and search for “Port Forwarding.”