OpenEye EasyDVR - Manual (Page 70)

70
CALL MONITOR DISPLAY
Using the CALL button, you can define what is being displayed on the BNC Call Monitor output.
To display a single channel:
1. Press CALL on the front panel or the remote control, or use the mouse to click SPOT on the right-
click menu or the onscreen menu bar.
2. Press any number button on the front panel or the remote control.
3. Press ESC/EXIT to return to Live Display mode.
To display all camera channels in sequence:
1. Press CALL on the front panel or the remote control, or use the mouse to click SPOT on the right-
click menu or the onscreen menu bar.
2. Press SEQ on the front panel or the remote control.
3. Press ESC/EXIT to return to Live Display mode.
Note The camera dwell time and the channels displayed in the sequence can be customized using
the Spot Monitor Dwell and Spot Monitor Sequence located in the DISPLAY setup menu.