Assign a unique unit id on the recorder, Set the number on the remote controller, Unit id and remote control number – OpenEye EasyDVR User Manual
Page 23
30757AC
23
Assign a unique Unit ID on the recorder
1. Press MENU.
•
If prompted, login with an administrator level username.
2. Select SYSTEM and press ENTER.
3. Select RS485 Setup and press ENTER.
4. Select Unit ID and press ENTER.
5. Use the UP/DOWN arrows to set the desired Unit ID.
6. Press ENTER when the desired number is displayed.
Note
See the Unit ID and Remote Control Number table below for additional reference.
Set the number on the Remote Controller
Press and hold the ID button on the remote controller and enter the corresponding Remote Control
number to operate the recorder. For example, assuming the Unit ID is set to 225, press ID on the
remote controller and then press 2 immediately.
Unit ID and Remote Control Number
To use the included remote controller, each recorder needs a unique Unit ID number that corresponds
with a Remote Control number. Use the table below for reference.
Unit ID
Remote Control ID
224
01
225
02
226
03
227
04
228
05
229
06
230
07
231
08
232
09
233
10
234
11
235
12
236
13
237
14
238
15
239
16