OpenEye EasyDVR - Manual (Page 72)

72
Presets
When the PTZ control menu is open, click the Preset icon with the mouse pointer (or press 1 on the
front panel or remote). From the Preset screen preset camera positions can be set or called, and tours
can be started.
Note Preset position and tours are stored in the camera, not in the recorder.
Note Most PTZ cameras have a designated preset that can be called to open the cameras
onscreen menu; please reference the camera manual or manufacturer website for details.
Creating a Camera Position Preset
1. Press the channel button of the PTZ camera you want to work with.
2. Press PTZ on the front panel or the remote control, or use the mouse to click PTZ on the right-click
menu or the onscreen menu bar.
3. Use the direction arrows and zoom to position the camera in a location you want to save.
4. Press 1 on the front panel or the remote control, or use the mouse to click Presets.
5. Enter a number for the preset position you want to create.
6. Select Set Preset and press ENTER (or click Set Preset with the mouse).
Calling a Camera Position Preset
1. Press the channel button of the PTZ camera you want to work with.
2. Press PTZ on the front panel or the remote control, or use the mouse to click PTZ on the right-click
menu or the onscreen menu bar.
3. Press 1 on the front panel or the remote control, or use the mouse to click Presets.
4. Enter the number of the preset position you want to call.
5. Select Go Preset and press ENTER (or click Go Preset with the mouse).
Calling a Camera Tour
1. Press the channel button of the PTZ camera you want to work with.
2. Press PTZ on the front panel or the remote control, or use the mouse to click PTZ on the right-click
menu or the onscreen menu bar.
3. Press 1 on the front panel or the remote control, or use the mouse to click Presets.
4. Enter the number of the tour you want to call.
5. Select Run Tour and press ENTER (or click Run Tour with the mouse).
Note Some camera models do not support tours and some only support a single tour. Most
cameras that do support tours require the tour configuration be done through the cameras
onscreen menus, please reference the camera manual or manufacturer website for details.