Turning on the dvr, First time power on, Normal power on – OpenEye EasyDVR User Manual

Page 36: Turning off the dvr

TURNING ON THE DVR

First Time Power On

1. Connect camera cables.

2. Connect monitor cable.

3. Connect network cable (if remote access will be needed).

4. Connect alarm inputs, relay output, or PTZ wires (if needed).

5. Connect the power cable to the recorder and wait until the main screen is displayed on the

connected monitor; this process will take approximately 90 seconds.

Normal Power On

1. Press the power button on the front panel.

TURNING OFF THE DVR

1. Press and hold the power button on the front panel until the login screen is displayed.

2. Highlight the admin account and press ENTER.

3. Enter the admin password and press ENTER.

4. At the confirmation prompt press ENTER to complete the shutdown.