OpenEye EasyDVR - Manual (Page 27)

30757AC 27
Display Button
Press the DISPLAY button repeatedly to cycle through the available display configurations. Depending
on the recorder model, the available options include: single channel, four cameras (2x2), nine cameras
(3x3), and sixteen cameras (4x4).
Searching Navigation Buttons
These six buttons are used for navigation while in Search mode.
Play
Play video forward at normal speed.
Pause
Freeze the video at the current location.
Fast Reverse
Play video in reverse at higher than normal speed.
Fast Forward
Play video forward at higher than normal speed.
Reverse 30 Seconds
Skip 30 seconds back in video.
Forward 30 Seconds
Skip 30 seconds forward in video.
USB Mouse
A USB mouse can be connected to the USB port on either the front panel
or the rear panel of the recorder. Having a USB mouse connected will allow
you to use the mouse pointer to select and click menu items (instead of
using the arrow buttons and ENTER on the recorder front panel). In most
scenarios the left mouse button will act similar to the ENTER button on the
front panel, the right mouse button will act similar to the EXIT button, and
the mouse scroll wheel can be used to adjust values. Using a USB mouse
also allows access to two additional menu controls: a right-click menu, and
the onscreen menu bar.
Right-Click Menu
While in Live Display mode, use the mouse to right-click anywhere on the
screen to display the Right-Click Menu. All of these menu options lead to the
same options as their corresponding front panel or remote control buttons.
Details on the options found in Menu selection can be found in the Setup
section later in this manual; details on the remaining items can be found in the
Operations section later in this manual.