Parity, Mouse sensitivity, Upgrade – OpenEye EasyDVR User Manual

Page 62: Language, Hard drive setup, Data lifetime, Circular recording

Parity

Parity allows you to select the parity that the RS485 network communicates at.

Mouse Sensitivity

Mouse Sensitivity allows you to configure the sensitivity of a connected USB mouse. Setting options
range from 10% to 100% in increments of 10. The 10% settings is the least sensitive, resulting in a
slower moving mouse pointer; and 100% is the most sensitive, resulting in a faster moving mouse
pointer.

Upgrade

Use this option to update the software version installed on the recorder.

Note

The currently installed version can be checked on the INFO menu.

1. Connect a USB storage device that contains the upgrade software to the recorder.

2. Select Upgrade and press ENTER.

3. Select Software Upgrade and press ENTER.

4. At the Upgrade prompt press ENTER.

5. Select the version you want to upgrade to and press ENTER.

6. Press the DOWN arrow to change the selection to YES and press ENTER.

Note

Wait for the upgrade to complete, and the recorder to restart and return to the live screen
before you remove the USB device.

7. Remove the USB storage device.

Language

Language allows you to change the language settings on the recorder.

Hard Drive Setup

Hard Drive Setup allows you configure a static number of days that video is stored, set the repair option,
and see total drive space as well as available free space.

Data Lifetime

Data Lifetime allows you to specify the number of days of recorded video to store and have available for
searching. Set this option to 0 to disable. Valid options for storing data range from 1 day to 365 days.

Warning Recorded data that falls outside the specified day range will be purged and cannot be

recovered.

Circular Recording

Circular Recording allows you to enable or disable the option to overwrite old data when the hard drive
fills. When set to On, the oldest video data is overwritten with new video once the hard drive has filled.
When set to Off, the recorder will alert you with an onscreen message and internal buzzer beep (if
enabled) at 98% disk usage; and stop recording when the hard drive is full.