OpenEye EasyDVR - Manual (Page 64)

64
Repair On Power Loss
Repair On Power Loss allows you to enable or disable the automatic hard drive scan and repair process
that occurs upon startup after a power loss or improper shutdown.
Total Size
Total Size displays the total storage capacity of all hard drives that are active.
Free Size
Free Size displays the current free space on the hard drives that are active.
Configuration
Configuration allows you to export and import your recorder settings, and reset the recorder back to
factory defaults.
Export Configuration
1. Select Configuration and press ENTER.
2. Connect a USB storage device to the recorder.
3. Select Export Configuration and press ENTER.
4. Select Destination and press ENTER.
5. Select the USB storage device to export to and press ENTER.
6. Press DOWN arrow to change the selection to Yes, and then press ENTER.
7. Select File Name and press ENTER.
8. Use the onscreen keyboard to enter the desired file name (up to 15 characters).
9. When you are finished select OK and press ENTER.
10. Select Export and press ENTER.
11. Press DOWN arrow to change the selection to Yes, and then press ENTER.
Import Configuration
1. Select Configuration and press ENTER.
2. Connect a USB storage device to the recorder that contains a configuration export file.
3. Select Import Configuration and press ENTER.
4. Select the configuration file you want to import and press ENTER.
5. Press DOWN arrow to change the selection to Yes, and then press ENTER.
6. Press ENTER to confirm the configuration load and system restart.
Note This load and restart may take up to 5 minutes, and cannot be aborted or interrupted.