Measurement Computing eZ-TOMAS version 7.1.x - Manual (Page 51)

eZ-TOMAS & eZ-TOMAS Remote 929891 Control Menu 4-1
Control Menu 4
The Control Menu allows you to enable and disable several functions which can also be controlled via switches and buttons
on the lower panels of the Gauge Window.
To minimize redundancy, information from Chapter 1 is not being repeated here with exception of the following figure.
Please refer to Chapter 1 for details, if needed.
Control Pull-Down Menu’s Relation to Lower Panels
Note: In regard to eZ-TOMAS Remote, the following four features can be used in either monitor or controller mode: Lock
Limit Pointers, Show Gauge Setup, Show Gauge Values, Reset Peek Hold Values. These four features are “machine
local” only, meaning that their use [and the results of their use] never transfers from client to server or from server to
client.
These are the buttons from the “Options” panel
[lower right section of the Gauge Window.
This figure shows their corresponding menu
selection.
Double-click in this area to add notes. Use the
up/down buttons to scroll through the notes.