Measurement Computing eZ-TOMAS version 7.1.x - Manual (Page 11)

eZ-TOMAS & eZ-TOMAS Remote 887491 Introduction to eZ-TOMAS 1-9
A Look at the Gauges Pull-down Menu
Most of the Gauge window is occupied by gauges which display values for spectral bands and tachometers.
Selection of the band types can be made from the “Gauges” pull-down menu.
The window supports up to four frames (A, B, C, D). Each frame can accommodate up to ten gauges.
Gauges Pull-down Menu
You can define the parameters of User Defined bands E through N in the Spectral Bands window as follows:
1. Open the Edit pull-down menu.
2. Select Spectral Bands.
3. Set the parameters of the User Defined bands (E through N) as desired.
Additional information of primary importance to the gauge window is included in Chapter 3, which concerns
the window’s Edit menu.
Note: For the IOtech 655, gauges can also be set to monitor temperature. Gauge Display Preferences in
Chapter 3 provides additional information.