Measurement Computing eZ-TOMAS version 7.1.x - Manual (Page 100)

eZ-TOMAS and eZ-TOMAS Remote 927191 Using eZ-TOMAS Remote 10-6
Configuration
Server Configuration - Settings needed in eZ-TOMAS
Before connecting a client (eZ-TOMAS Remote) to the server, the following must be performed
via eZ-TOMAS:
(a) initialize the project
(b) verify hardware communication
(c) configure the acquisition
(d) set the input channels, and
(e) configure the server
To configure the server:
1 Open the eZ-TOMAS gauge window [main
window].
2 Open the Edit pull-down menu
(figure at right).
3 Select Server Configuration, as indicated in the
figure. As an alternative you can use the shortcut,
Ctrl+R.
A Server Configuration dialog box will appear (following figure).
Selecting “Server Configuration” from
the eZ-TOMAS Edit Menu