Measurement Computing eZ-TOMAS version 7.1.x - Manual (Page 24)

eZ-TOMAS & eZ-TOMAS Remote 988490 Monitoring a Machine 2-13
Time Display and Spectrum Display Plots Tiled Horizontally
Each plot is longer in the horizontal direction.
A cursor is provided with each display. To move the cursor, place your mouse icon over the cursor and
drag it to the desired location on the trace or use the East / West Arrows.
“Real Time” Plot Controls
“Real Time” is the default data source. For Real Time displays you can Halt and Resume the display of
data by using the <Pause/Continue> toggle button (see following figure). As an option to the Continue> button you can use the “P” key on the PC’s keyboard. A table, which identifies all control
buttons follows shortly.
The button, which looks like a black “X,”allows you to clear the data in
the realtime trend displays. This display option can be used to clear the plot displays prior to starting a
test.
Selects
Real Time
Mode
Pause/
Continue Clear Real Time
Plot Buffer
Real Time Mode is Selected
Reference Note:
Refer to Chapter 6 for more detailed information regarding Plots and the associated toolbar
buttons and other controls.