Measurement Computing eZ-TOMAS version 7.1.x - Manual (Page 21)

eZ-TOMAS & eZ-TOMAS Remote 988490 File Menu 2-10
Viewing Spectral Bands
You can set spectral band options from the Main Gauge
Window. There are several methods of setting gauges;
these are discussed below.
In the partial gauge window at the right, we see five gauges
with spectral bands selected as follows, from left to right.
1. DCGapV. Vdc
2. 1xAmp: mils (p-p)
3. 1xAmp: mils (p-p)
4. DCGapV: Vdc
5. Overall: mils (p-p)
We can change the spectral band for each gauge,
independently; or we can make a global change – where we
would apply the same spectral band to all gauges at once.
To set a gauge independent of other gauge settings:
1. Right-click in the applicable gauge.
2. Select “Spectral Band.”
3. Select the desired band type.
(See second figure)
Open TCs and Open IEPE
Open temperature and open IEPE channels are indicated
by a blue gauge label. In the figure to the immediate right
we see that “Temp Ch 4” has a black gauge label which is
indicative of a normal (closed) connection. “Temp Ch 5,”
however, has a blue gauge label, which indicates that the
associated thermocouple is open.
Note that the example at the right is from an
IOtech 655u which includes five temperature
channels.