Measurement Computing eZ-TOMAS version 7.1.x - Manual (Page 32)

eZ-TOMAS & eZ-TOMAS Remote 887591 Edit Menu 3-6
Input Channels Tab, Scrolled Right - Showing the Rightmost Column
To configure a channel:
1. Select the channel to be configured.
2. Set the instrument type.
3. Set the value for each attribute of the channel.
Repeat this process for each channel.
The parameters of one channel can be copied to another channel by using
options on the Edit menu.
Input Channels Tab Column Functions
No. is the channel number. Selecting the channel number highlights all attributes for that
channel.
Type is the type of instrument attached to the channel. Options are:
o Accelerometer
o Velocity
o Displacement
o Static
o Tach
o Microphone
o Pressure
o General
o Unused (select “Unused” for channels that
have no instrument attached.)
Name is a Label you will use to identify the channel.
Gauge Min,
Gauge Max represent the instrument range minimum and maximum gauge values.
Units the Engineering Units label you want to use.