Measurement Computing WaveBook rev.5.3 - Manual (Page 95)

Programmable Features
Channels can be configured through your own custom programs or through the included out-of-the-box
WaveView software. WaveView includes a Channel Configuration screen (following figure) that allows
you to turn channels ON or OFF, select channel ranges, change channel labels, and select engineering
units.
Reference Note:
The WaveView document module contains more detailed information. Individuals who write
their own programs should refer to the readme.txt file [on the install CD-ROM] in regard to
the location of API reference material, including program examples.
Configuring Channels from WaveView’s Main Window
Selecting a Channel’s Range
You can use WaveView to select a channel’s range in one of two ways.
(1) Click in a channel’s Range cell; then select the desired range from the “Select Range”
pull-down list.
(2) Continue to double-click in the applicable channel’s Range cell to cycle through the
available ranges. Stop double-clicking when the desired range is indicated.
WaveBook/512A, /516, /516A , /516E 897895 WaveBook Operation Reference 4-25