Measurement Computing WaveBook rev.5.3 - Manual (Page 9)

489-0940, rev 2.0 324604B-01 Printed in Hungary
WaveBook/516E Quick Start
Ethernet-Based Portable High-Speed Waveform Acquisition System
WaveBook/516E
Before you get started
Verify that you have the following items.
•
•
•
•
•
•
•
•
WaveBook/516E
TR-40U Power Supply
Ethernet Patch Cable
Ethernet jack [on PC or on a hub connected to the Ethernet]
Software CD
Dynamic Signal Analysis CD (for eZ-Software*), or
Data Acquisition CD (for WaveView) See Note, pg. 2
License Keys for purchased [eZ]software
Monitor: SVGA, 1024 x 768 screen resolution
Windows 2000 and Windows XP users
:
PC with I ntel ™ Pentium, 1 GHz or equivalent;
512 MB memory; 10 GB disk space
• Windows Vista users:
PC must be Windows Vista Premium Ready
Step 1 - Install Software
1. Close all running applications on the host PC.
2. Insert the CD [
for eZ-Software or WaveView, as applicable ] into your CD-ROM drive and wait for the CD to auto-run.
An Opening Screen will appear. As an alternative, you can download software from: www.iotech.com/ftp.html
3. Click the <ENTER SETUP> button.
Note: If you are downloading software from our website, follow instructions provided there.
4. From the hardware selection screen [which follows a licensing agreement], select
WaveBook/516E from the drop-down list and follow the on-screen instructions.
Step 2 - Connect the WaveBook/516E to the Ethernet
In this scenario a WaveBook/516E is connected directly to an Ethernet port on a host computer. Please consult your
user’s manual (located in PDF format on the CD) should you need information regarding other network types.
1. Connect the Ethernet cable to the WaveBook/516E Ethernet jack on the unit’s rear panel.
2. Connect the other end of the Ethernet cable to the Ethernet jack on the host computer or
network hub.
Step 3 - Connect the WaveBook/516E to Power
1. With the WaveBook/516E power switch “OFF,” connect the power supply cable from the TR-40U to the
WaveBook’s Power-In DIN5 connector (located on the rear panel).
2. Connect the TR-40U plug to a standard AC outlet; and turn the WaveBook’s power switch to “ON.”