Measurement Computing WaveBook rev.5.3 - Manual (Page 66)

Example 4: WaveBook/516E with a WBK41 and 2 WBK10A Modules
Device Interface Side Channel Input Side
WaveBook/516E with a WBK41 and 2 WBK10A Modules
WBK41
WaveBook/516E
WBK10A (1 st )
WBK10A (2 nd )
Power
Ethernet
Power
Power
Lines and Cables Used in Example 4, excluding channel input connections.
1. Power Supply - To the WaveBook/516E POWER IN DIN 5 connector, +10 VDC to +30 VDC,
typically from a TR-40U power adapter.
2. Power Supply - To the WBK41 POWER IN DIN 5 connector, +10 VDC to +30 VDC, typically
from a TR-40U power adapter.
3. Power Supply – To the first WBK10A POWER IN DIN 5 connector, +10 VDC to +30 VDC,
typically from a TR-40U power adapter.
4. Power Supply – From the first WBK10A’s POWER OUT DIN 5 connector, +10 VDC to +30 VDC,
to the second WBK10A’s POWER IN DIN 5 connector via a CA-115 Power Cable.
5. Ethernet – From the WaveBook/516E’s ETHERNET jack to a 10/100BaseT Ethernet Network or to
the ETHERNET jack on a PC. Applicable Ethernet patch cables (1.5-foot or 7-foot) are CA-242 and
CA-242-7, respectively.
6. Synchronization – From a WaveBook/516E SYNC jack to a WBK41 SYNC jack. The connection is
made via a CA-74-1 cable.
7. Expansion – From WaveBook/516E’s EXPANSION PORT 1 to the WBK41’s PARALLEL PORT.
The connection is made via a CA-35-12 cable.
8. Expansion Control – From WaveBook/516E’s EXPANSION CONTROL to the first WBK10A’s
EXPANSION CONTROL IN. Connection is via a 15-pin CA-129 cable.
9. Expansion Control – From the first WBK10A’s EXPANSION CONTROL OUT to the second
WBK10A’s EXPANSION CONTROL IN. Connection is via a 15-pin CA-129 cable.
10. Expansion Signal – From the second WBK10A’s EXPANSION SIGNAL OUT to the first
WBK10A’s EXPANSION SIGNAL IN. Connection is via a BNC coaxial CA-150 cable.
11. Expansion Signal – From the first WBK10A’s EXPANSION SIGNAL OUT to the
WaveBook/516E’s EXPANSION SIGNAL IN. Connection is via a BNC coaxial CA-150 cable.
3-6 System Examples 897895 WaveBook User’s Manual