Measurement Computing WaveBook rev.5.3 - Manual (Page 29)

2-9 System Setup & Power Options 947191 Connecting to the Ethernet
CAUTION
Turn off power to the system devices and externally connected equipment before connecting cables.
Electric shock or damage to equipment can result even under low-voltage conditions.
Take ESD precautions (packaging, proper handling, grounded wrist strap, etc.)
Reference Note: Adobe PDF versions of user manuals will automatically install onto your hard drive as a
part of product support. The default location is in the Programs group, which can be accessed from the
Windows Desktop. You can also access documents directly from the data acquisition CD via the PDFs> button located on the CD’s opening screen.
STEP 1
–
Install the Software
1. Remove
previous version Daq drivers, if present. You can do this through Microsoft’s Add/Remove
Programs feature.
2. Place the Data Acquisition CD into the CD-ROM drive. Wait for PC to auto-run the CD. This may take a
few moments, depending on your PC. If the CD does not auto-run, use the Desktop’s Start/Run/Browse
feature to locate and run Setup.exe [from the applicable CD-ROM drive].
3. After the intro-screen appears, follow the screen prompts.