Measurement Computing WaveBook rev.5.3 - Manual (Page 33)

2-13 System Setup & Power Options 947191 Connecting to the Ethernet
How to make the connection:
1. Using the unit’s power switch, turn the DaqBook/2000E or WaveBook/516E “OFF.
The switch will be in the “0” position and the power LED will be unlit.
2. Connect the DIN5 end of the adapter’s cable to the power in connector on the DaqBook/2000E
or WaveBook/516E.
3. Connect the adapter’s plug to a standard AC outlet.
4. If your adapter has a power switch, position it to “ON.”
5. T urn ON the DaqBook/2000E or the WaveBook/516E by placing the power switch to the
“1” position. The power led will light up.
Reference Note:
Refer to the power-related sections of this manual before powering up a system. The sections
begin on page 2-28.