Scan synchronization – Measurement Computing WaveBook rev.5.3 User Manual
Page 47

Scan Synchronization
Up to four “A” and/or “E” Series WaveBooks can be scan-synchronized and triggered from any other
WaveBook (A or E Series) that is connected via a SYNC cable. Note that the two SYNC connectors
[on each WaveBook] are identical. Either one, or both, can be used to connect to other WaveBooks.
Note that chapter 3 includes additional system examples that make use of scan-synchronization.
Up to four units can be synchronized. The total combined length of the SYNC
cables is not to exceed 15 feet (4.57 m).
WaveBook User’s Manual
979194
System Setup and Power Options 2-27
CA-150
CA-129
To PC, WBK25, or WaveBook/516E
CA-115, 5 Amp Limit
Synchronizing two WaveBook Systems, each having two Expansion Modules
Reference Notes:
Chapter 3, System Examples includes various system setups that make use of the
synchronization feature.
The Triggers section of Chapter 4, WaveBook Operation Reference, contains a
subsection regarding synchronization.