Measurement Computing WaveBook rev.5.3 - Manual (Page 78)

WBK30
WBK30 is a DRAM-based memory board option that can be installed inside a WaveBook.
There are three models of WBK30 available; each significantly increases the capacity of a
WaveBook's standard data buffer of 64 K samples. Capacities are as follows:
WBK30/16 -16 MB, WBK30/64 - 64 MB, WBK30/128 - 128 MB
Note: For WaveBook/516E the WBK30 option, if selected, must be factory installed.
WBK30 Installation
This illustration does not apply
to WaveBook/516E.
Reference Note:
Refer to the WBK Options User’s Manual (p/n 489-0902) for WBK30 installation details. A PDF
version of the document is included on the data acquisition CD.
Important Notice! WaveBook/516E Users
WBK option cards for WaveBook/516E are installed at the factory per customer order.
Users are not to remove or install cards for these products as the cards are not “plug-and-
play” for these devices and erroneous signal values could result. If you desire to remove or
add a card to WaveBook/516E contact the factory or your service representative.
Reference Note:
The WBK option cards and modules that follow are detailed later in the WBK Options User’s
Manual, p/n 489-0902. A PDF version of the document is included on the data acquisition CD.
4-8 WaveBook Operation Reference 897895 WaveBook/512A, /516, /516A, /516E