Waveview issues, Frequently asked questions – Measurement Computing WaveBook rev.5.3 User Manual
Page 126
7-18 Troubleshooting
979194
WaveBook User’s Manual -
IO version
WaveView Issues
•
•
•
•
•
•
Acquisition parameters can not be changed during an active acquisition.
International settings are supported, but some text boxes may not completely show the comma when it is used as the
decimal place holder.
The Scope Mode’s print resolution is determined by the host computer’s video driver. Some graphics drivers may
require adjustment of the resolution and/or color palette for proper print operation. For some printers, better output
is attained by changing the printer's dithering setting to "None".
Scope scale changes do not become effective until the focus changes. This is best accomplished by hitting
.
Text boxes for the filter settings may not display the proper setting if the number entered must be rounded to the
nearest filter setting. This is a problem only with the number displayed and does not affect the actual filter setting
that is passed down to the driver.
Conversion to Snap Master format from the menu option is not supported. Snap Master format conversion does
work properly when done as part of a direct-to-disk acquisition.
Frequently Asked Questions
(1) Topic: Environmental Factors
Question: What Environments are WaveBook Systems Intended for?
Answer: WaveBook Systems are designed to operate within 0° to 50°C ( 32° to 122°F) and with a
relative humidity of up to 95%RH, non-condensing. The products can be stored at temperatures
within the range of -20° to +70°C (-40° to 158°F). WaveBook systems should always be
protected from snow, rain, extreme dust, and harsh sun.
(
2) Topic: 32-Bit API Support, DaqX
Question: I am writing my own application that interfaces to the WaveBook. Is the 32-bit enhanced mode
support available?
Answer: Yes, the current version of the DaqX software supports 32 bit enhanced mode programming.
Question: What is DaqX software?
Answer: DaqX software is low-level software support for application development. DaqX is installed
during the installation of the WaveView application. DaqX supports Visual C++ and Visual
Basic programming environments.
Question: Where can I get the latest version of WaveView/DaqX software?
Answer: You can download the latest versions from our website. This service is free.