Measurement Computing WaveBook rev.5.3 - Manual (Page 73)

Note 3
WaveBook/516E Block Diagram
Note 1: Each channel has input protection and connects to J10 via its own BNC connector. Channel 1 is the only
channel that connects to the Pulse Discriminator and Analog Trigger.
Note 2: An optional WBK11A, WBK12A, or WBK13A card can be used in place of the PGA board. However, these
boards are only to be installed at the factory as they are not “Plug-and-play” for WaveBook/516E.
Note 3: Expansion Ports 1, 2, and 3 are typically used to connect up to three of the following devices:
WaveBook/512A, WaveBook/516A, WBK40, WBK41. Any combination of these devices can be connected.
WaveBook/512A, /516, /516A , /516E 897895 WaveBook Operation Reference 4-3