Standard Horizon HX-870 - Manual (Page 98)

Page 98 HX870
13.7 SOFT KEYS
This menu item allows soft key assignment and how long the display will show
the soft key icon after a soft key is pressed.
13.7.1 Key Assignment
1. Press the MENU key to display “MENU”.
DSC SETUP
GM SETUP
BACK
SETUP
WAYPOINT SETUP
CH SETUP
GPS SETUP
CONFIGURATION
SELECT
DIMMER
LAMP
CONTRAST
KEY BEEP
BATTERY SAVE
STROBE LED
SOFT KEY
CONFIGURATION
BACK SELECT
KEY ASSIGNMENT
BACK
CONFIGURATION
KEY TIMER
SELECT
SOFT KEY
1:WX/CH
BACK
CONFIGURATION
2:DUAL WATCH
3:TX HI/LOW
4:SCAN
5:CH NAME
SELECT
KEY ASSIGNMENT
WX/CH
BACK
CONFIGURATION
DUAL WATCH
TX HI/LOW
SCAN
CH NAME
ENTER
KEY SELECTION
2. Select “SETUP” with the CH▼/CH▲/◄/►
key, then press the [SELECT] soft key.
3. Select “CONFIGURATION” with the CH▼/
CH▲ key, then press the [SELECT] soft key.
4. Select “SOFT KEY” with the CH▼/CH▲ key,
then press the [SELECT] soft key.
5. Select “KEY ASSIGNMENT” with the CH▼/
CH▲ key, then press the [SELECT] soft key.
6. Press the CH▼/CH▲ key to select the key
number to be programmed, and press the
[SELECT] soft key.
7. Press the CH▼/CH▲ key to select a new
function to be assigned, and press the
[ENTER] soft key. Available functions are
listed below. By selecting “NONE” the soft
key assignment is removed.
8. Repeat steps 6 and 7 to program other soft
keys. Up to 12 functions can be assigned.
9. Press the CLR key to return to radio operation.
DISPLAY FUNCTION
WX/CH Switches channels between weather and marine.
HI/MD/LO Selects transmit power.
SCAN Turns on or off scanning function.
DW/TW Turns on or off dual or triple watch scan.
MOB Marks the position where a person falls overboard.
COMP Enables the “Compass” display.
NAVI Enables the “Waypoint” or “Route” navigation display.
MARK Marks the current position for a “Waypoint”.
MEM Add or remove channels from memory channel scan.
PRESET Programs or deletes the preset memory channel.
NAME Edit channel names.
STROBE Turns on or off the strobe light LED.
LOGGER Starts and stops logging position data.
NCR Enables the noise canceling settings display.