Standard Horizon HX-870 - Manual (Page 54)

Page 54 HX870
1. Press the MENU key to display “MENU”.
DSC SETUP
GM SETUP
BACK
SETUP
WAYPOINT SETUP
CH SETUP
GPS SETUP
CONFIGURATION
SELECT
INDIVIDUAL DIR.
INDIVIDUAL REPLY
INDIVIDUAL ACK.
INDIVIDUAL RING
GROUP DIR.
AUTO POS POLLING
AUTO POS TIME
DSC SETUP
BACK SELECT
ADD
BACK
DSC SETUP
EDIT
DELETE
SELECT
GROUP DIR.
GROUP NAME:
-----------------
0--------
MMSI:
SELECT
GROUP DIR.
BACK
GROUP NAME:
STANDARD---------
087654321
MMSI:
SELECT
GROUP DIR.
BACK
SAVE
BACK SELECT FINISH
GROUP DIR.
GROUP NAME
Z Y 1 2
a& [
3 4 5 6 7 8 9 0
N M O P Q R S T U V W X
B A C D E F G H I J K L
Delete
- -------------- S
2. Press the CH▼/CH▲/◄/► key to select
“SETUP”, then press the [SELECT] soft key.
3. Select “DSC SETUP” with the CH▼/CH▲ key.
4. Press the [SELECT] soft key, then select
“GROUP DIR.” with the CH▼/CH▲ key.
5. Press the [SELECT] soft key, then select
“ADD” with the CH▼/CH▲ key.
6. Press the [SELECT] soft key.
7. Press the CH▼/CH▲ key to scroll through
the first letter of the name of the group you
want to reference in the directory.
8. Press the [SELECT] soft key to store the
first letter in the name and step to the next
letter to the right.
9. Repeat steps 7 and 8 until the name is
complete. The name can consist of up to
eleven characters, if you do not use all
eleven characters, select “→” to move to the
next space. This method can also be used
to enter a blank space in the name.
If a mistake was made entering in the name, press the CH▼/CH▲/◄/►
key to select “←” or “→”, press the [SELECT] soft key until the wrong
character is selected, then perform steps 7 and 8.
10. After the eleventh letter or space has been entered, press the [FINISH]
soft key to advance to the group MMSI number entry.
11. Press the CH▼/CH▲ key to select the second number of the MMSI (nine
digits: first digit permanently set to “0”) which you want to contact, then press
the [SELECT] soft key to step to the next number. Repeat this procedure
until all eight spaces of the MMSI number are entered.
If a mistake was made entering in the MMSI number, press the CH▼/
CH▲/◄/► key to select “←” or “→”, press the [SELECT] soft key until the
wrong character is selected, then perform step 11.
12. After the nineth letter has been entered, press the [FINISH] soft key to
confirm.
13. To store the data, select “SAVE”, then press the [SELECT] soft key.
14. To enter another group address, repeat steps 6 through 13.
15. Press the CLR key to return to radio operation.