Standard Horizon HX-870 - Manual (Page 30)

Page 30 HX870
When selecting “TRIPLE” in the SETUP menu, [TRIPLE WATCH] will be
displayed as the soft key instead of [DUAL WATCH].
NOTE
The priority channel may be changed from CH16 (default) to another
channel. Refer to section “ 14.7 PRIORITY CHANNEL”.
8.9 SCANNING
The HX870 will automatically scan channels programmed into the preset
channel memory and also the scan channel memory, and the last selected
weather channel.
When an incoming signal is detected on one of the channels during scan, the
radio will pause on that channel, allowing you to listen to the incoming transmis-
sion. The radio will automatically start scanning again after the transmission
stops.
8.9.1 Selecting the Scan Type
1. Press the MENU key to display “MENU”, then
select “SETUP” with the CH▼/CH▲/◄/►
key.
DSC SETUP
GM SETUP
BACK
SETUP
WAYPOINT SETUP
CH SETUP
GPS SETUP
CONFIGURATION
SELECT
CH GROUP
WX ALERT
SCAN MEMORY
SCAN TYPE
SCAN RESUME
MULTI WATCH
PRIORITY CH
CH SETUP
BACK SELECT
ON
PRIORITY
BACK
CH SETUP
MEMORY
ENTER
SCAN TYPE
2. Press the [SELECT] soft key, then press the
CH▼/CH▲/◄/► key to select “CH SETUP”.
3. Press the [SELECT] soft key, then select
“SCAN TYPE” with the CH▼/CH▲ key.
4. Press the [SELECT] soft key.
5. Press the CH▼/CH▲ key to select “PRIOR-
ITY ” or “MEMORY”.
6. Press the [ENTER] soft key to store the
selected setting.
7. Press the CLR key to return to radio opera-
tion.
M
eMory
S
can
(M-Scan)
CH12
CH09
CH01A
CH15
CH18
CH22A
CH61A
CH68A
CH68A
CH88A
P
riority
S
can
(P-Scan)
Priority Channel
CH12
CH09
CH01A
CH15
CH18
CH22A
CH61A
CH68A
CH68A
CH88A