Standard Horizon HX-870 - Manual (Page 79)

Page 79 HX870
11 NAVIGATION
The HX870 is capable of storing up to 200 waypoints for navigation using the
compass page.
You can also navigation to DSC distress calls with position or a position received
from another DSC radio using DSC polling.
11.1 WAYPOINT OPERATION
11.1.1 Starting and Stopping Navigation
Navigation by Using the Waypoint Directory
1. Press the
MENU key to display “MENU”.
WAYPOINT
ROUTE
SELECT
NAVI
BACK
HISTORY
MEMORY
MANUAL
WAYPOINT
BACK SELECT
KAREN
BOB
366901254
Horizon-1
Standard
Horizon-2
USCG
WAYPOINT
BACK SELECT
HISTORY
SOG
kph
36.0
DST km
35.2
BRG T
WPT KAREN
HI USA
WPT
N-UP 20nm
BUSY
300
25
°
DW-16
2. Select “NAVI” with the CH▼/CH▲/◄/►key,
then press the [SELECT] soft key.
3. Select “WAYPOINT” with the CH▼/CH▲ key,
then press the [SELECT] soft key.
4. Select the desired category (“HISTORY” or
“MEMORY”) with the CH▼/CH▲ key, then
press the [SELECT] soft key.
5. Press the CH▼/CH▲ key to select a
waypoint, then press the [SELECT] soft key.
The navigation screen will appear.
The screen includes the distance and direc-
tion to the destination, and the waypoint is
indicated by a dot () inside the compass.
6. Press ◄/► key, then press the [STOP] soft
key to stop the navigation.