Standard Horizon HX-870 - Manual (Page 92)

Page 92 HX870
12.1.3 Enabling/Disabling Transmission during GM Operation
1. Press the MENU key to display “MENU”.
DSC SETUP
GM SETUP
BACK
SETUP
WAYPOINT SETUP
CH SETUP
GPS SETUP
ATIS SETUP
SELECT
GM GROUP DIR.
GM TX
INTERVAL
GM SETUP
BACK SELECT
OFF
BACK
GM SETUP
ON GM
ON ALL
ENTER
GM TX
2. Press the CH▼/CH▲/◄/► key to select
“SETUP”, then press the [SELECT] soft key.
3. Select “GM SETUP” with the CH▼/CH▲ key,
then press the [SELECT] soft key.
4. Select “GM TX” with the CH▼/CH▲ key, then
press the [SELECT] soft key.
5. Press the CH▼/CH▲ key to select the
desired transmission type, then press the
[ENTER] soft key.
OFF : Disables the transmission during
GM operation.
ON GM : Enables the transmission during
the GM target display.
ON ALL : Enables the transmission during
the GM operation.
6. Press the CLR key to return to radio opera-
tion.
12.2 STARTING GM OPERATION
1. Press the MENU key to display “MENU”.
KAREN
BOB
366901254
Horizon-1
Standard
Horizon-2
USCG
GROUP MONITOR
BACK SELECT
MEMORY
SOG kph
36.0
DST
km
35.2
BRG
T
1
2
3
5
6
4
GM 1 KAREN
HI USA
GM
N-UP 20nm
BUSY
300
25
°
DW-16
2. Press the CH▼/CH▲/◄/► key to select
“GM”, then press the [SELECT] soft key.
3. Select a group you want to monitor with the
CH▼/CH▲ key, then press the [SELECT]
soft key.
The GM operation starts and the GM target
display appears.
4. Press the CLR key to return to radio opera-
tion.