Standard Horizon HX-870 - Manual (Page 33)

Page 33 HX870
4. Repeat steps 1 through 4 to program the desired channels into the preset
channels. Up to 10 channels can be registered. If you attempt to register
the 11th channel, error beep will sound.
8.10.2 Operation
1. Press the ◄/► key repeatedly, then press the [PRESET]
soft key to recall the preset channel. The “ [P-SET]” icon
will appear on the display.
P
16
DISTRESS
VOL
118°09.582
33°37.120
W
s
LOC 09.56 AM
BUSY HI USA
TIME
LON
LAT
P-SET
A
22
USCG
VOL
118°09.582
33°37.120
W
s
LOC 09.56 AM
BUSY HI USA
TIME
LON
LAT
C
A
MEM
P-SET
2. Press the CH▼/CH▲ key to select the desired preset
channel.
3. Press one of soft keys, then press the [PRESET] soft key
to return to the last selected channel. The “ [P-SET]” icon
will disappear from the display.
8.10.3 Deletion
1. Press the ◄/► key repeatedly, then press the [PRESET]
soft key to recall the preset channel.
A
22
USCG
VOL
118°09.582
33°37.120
W
s
LOC 09.56 AM
BUSY HI USA
TIME
LON
LAT
C
A
MEM
P-SET
A
22
USCG
VOL
118°09.582
33°37.120
W
s
LOC 09.56 AM
BUSY HI USA
TIME
LON
LAT
C
A
MEM
P-SET
QUIT DELETE
2. Press the CH▼/CH▲ key to select the preset channel to
be deleted.
3. Press one of soft keys, then press and hold the [PRESET]
soft key until the “ [P-SET]” icon and channel number are
blinking.
4. Press the [DELETE] soft key to delete the channel from
the preset channel memory.
5. Repeat steps 2 through 4 to delete the desired channels
from preset channels.
6. To exit from deleting the preset channels, press the [QUIT]
soft key.