13 configuration setup, 1 dimmer adjustment, 2 lamp – Standard Horizon HX-870 User Manual
Page 94
Page 94
HX870
13 CONFIGURATION SETUP
13.1 DIMMER ADJUSTMENT
This menu selection adjusts the backlight intensity.
1. Press the
MENU key to display “MENU”.
DSC SETUP
GM SETUP
BACK
SETUP
WAYPOINT SETUP
CH SETUP
GPS SETUP
CONFIGURATION
SELECT
DIMMER
LAMP
CONTRAST
KEY BEEP
BATTERY SAVE
STROBE LED
SOFT KEY
CONFIGURATION
BACK
SELECT
DIMMER
5
CONFIGURATION
BACK
ENTER
2. Select “SETUP” with the
CH▼/CH▲/◄/►
key, then press the
[SELECT] soft key.
3. Select “CONFIGURATION” with the
CH▼/
CH▲ key, then press the [SELECT] soft key.
4. Select “DIMMER” with the
CH▼/CH▲ key,
then press the
[SELECT] soft key.
5. Press the
CH▼/CH▲ key to select the
desired level (“5” is default). When “OFF” is
selected, the lamp is turned off.
6. Press the
[ENTER] soft key to store the
selected level.
7. Press the
CLR key to return to radio operation.
13.2 LAMP
This menu selection is used to setup the illumination time of the display and
keypad.
1. Press the
MENU key to display “MENU”.
DSC SETUP
GM SETUP
BACK
SETUP
WAYPOINT SETUP
CH SETUP
GPS SETUP
CONFIGURATION
SELECT
DIMMER
LAMP
CONTRAST
KEY BEEP
BATTERY SAVE
STROBE LED
SOFT KEY
CONFIGURATION
BACK
SELECT
OFF
BACK
CONFIGRATION
3sec
5sec
10sec
CONTINUOUS
SELECT
LAMP
2. Select “SETUP” with the
CH▼/CH▲/◄/►
key, then press the
[SELECT] soft key.
3. Select “CONFIGURATION” with the
CH▼/
CH▲ key, then press the [SELECT] soft key.
4. Select “LAMP” with the
CH▼/CH▲ key, then
press the
[SELECT] soft key.
5. Press the
CH▼/CH▲ key to select the
desired time.
OFF
:
Disables the display/keypad
lamp illumination.
3/5/10 Sec
: Illuminates the display/keypad
for the selected time when
you press any key (except the
PTT switch).
CONTINUOUS
: Illuminates the display/keypad continuously.
6. Press the
[ENTER] soft key to store the selected setting.
7. Press the
CLR key to return to radio operation.