Standard Horizon HX-870 - Manual (Page 119)

Page 119 HX870
16.14 SUMMARY OF THE GPS SETUP
Item Description Default Value
GPS ON/OFF Turns on or off the GPS receiver ON
POWER SAVE Selects the power save mode of the GPS
unit
AUTO
DIRECTION Selects the compass direction to be
displayed
COURSE UP
LOCATION FORMAT Selects the coordinate system to be
displayed
ddd°mm.mmm
TIME OFFSET Sets the offset time from the UTC (avail-
able only when “LOCAL” is selected in the
item “TIME AREA”)
00:00
TIME AREA Selects the time location to be displayed,
from UTC or local
UTC
TIME FORMAT Selects the time format to be displayed,
12-hour or 24-hour (fixed to “24H” when
“UTC” is selected in the item “TIME AREA”)
24H
UNITS OF MEASURE Selects the unit if measure when displaying
speed, distance, and altitude
SPEED: kts
DISTANCE: nm
ALTITUDE: ft
PINNING Turns on or off GPS position updates for
vessel not underway
OFF
D-GPS Turns on or off of use of SBAS ON
OUTPUT
SENTENCES
Selects a sentence to be output to the
USB terminal
OFF
LOGGER INTERVAL Selects the interval time of logging 1 min
LOG ERASE Erases the log data −