Standard Horizon HX-870 - Manual (Page 20)

Page 20 HX870
6.5 CHANGING THE GPS TIME
From the factory the HX870 shows GPS satellite time or UTC (Universal Time
Coordinated) time. A time offset is needed to show the local time in your area.
The time offset must be changed in order for the radio to display the current
time in your area. See the Offset Time Table below.
o
ffSet
t
ime
t
able
1. Press the MENU key to display “MENU”, then
select “SETUP” with the CH▼/CH▲/◄/►
key.
DSC SETUP
GM SETUP
BACK
SETUP
WAYPOINT SETUP
CH SETUP
GPS SETUP
CONFIGURATION
SELECT
GPS ON/OFF
POWER SAVE
DIRECTION
LOCATION FORMAT
TIME OFFSET
TIME AREA
TIME FORMAT
GPS SETUP
BACK SELECT
ON
+09:00
BACK
GPS SETUP
+08:30
+08:00
+07:30
+07:00
ENTER
TIME OFFSET
2. Select “GPS SETUP” with the CH▼/CH▲ key.
3. Press the [SELECT] soft key, then select
“TIME OFFSET” with the CH▼/CH▲ key.
4. Press the [SELECT] soft key, then press the
CH▼/CH▲ key to select time offset of your
location. See illustration above to find your
offset time. If “00:00” is assigned, the time
is the same as UTC or GPS satellite time.
5. Press the [ENTER] soft key to store the time
offset.
6. Press the CLR key to return to radio operation.