Standard Horizon HX-870 - Manual (Page 80)

Page 80 HX870
Navigation by Manually Entering a Waypoint
1. Press the
MENU key to display “MENU”.
WAYPOINT
ROUTE
SELECT
NAVI
BACK
HISTORY
MEMORY
MANUAL
WAYPOINT
BACK SELECT
SAVE & GOTO
NAME:
001WPT----------
SELECT
WAYPOINT
BACK
SAVE
POSITION:
--°--.---
-
-
---°--.---
BACK SELECT FINISH
WAYPOINT
POSITION
- -˚--.--- - Lat
---˚--.---
-
Lon
1 5 6 7 8 9 0 S N 2 4
Delete
3
SOG kph
36.0
DST km
35.2
BRG
T
WPT 001WPT
HI USA
WPT
N-UP 20nm
BUSY
300
25
°
DW-16
NAME:
001WPT ----------
SELECT
WAYPOINT
BACK
GOTO
POSITION:
24°25.975 N
118°59.456 W
SAVE & GOTO
2. Select “NAVI” with the CH▼/CH▲/◄/►key,
then press the [SELECT] soft key.
3. Select “WAYPOINT” with the CH▼/CH▲ key,
then press the [SELECT] soft key.
4. Select “MANUAL” with the CH▼/CH▲ key,
then press the [SELECT] soft key.
5. If you want to give the waypoint an easy-
to-find name, select “NAME” with the CH▼/
CH▲ key, press the [SELECT] soft key, then
enter the name. For details, refer to “ 10.5.1
Setting up the Individual / Position Call
Directory”.
6. Select “POSITION” with the CH▼/CH▲ key,
then press the [SELECT] soft key.
7. Press the CH▼/CH▲/◄/► key to select
the first number of latitude, then press
the [SELECT] soft key to step to the next
number.
8. Repeat step 7 to set the position.
If a mistake was made, press the CH▼/CH▲/◄/► key to select “←” or
“→”, press the [SELECT] soft key until the wrong character is selected,
then perform step 7.
9. When finished programming the position, press the [FINISH] soft key. The
display will return to the previous screen.
10. Select “SAVE & GO” with the CH▼/CH▲ key, then press the [SELECT] soft
key. The navigation screen will appear.
The screen includes the distance and direction to the destination, and the
waypoint is indicated by a dot () inside the compass.
11. Press ◄/► key, then press the [STOP] soft key to stop the navigation.