Standard Horizon HX-870 - Manual (Page 47)

Page 47 HX870
11. Press the CH▼/CH▲ key to scroll through numbers, 0-9. To enter the
desired number and move one space to the right by pressing the [ENTER]
soft key. Repeat this procedure until all nine space of the MMSI number are
entered.
If a mistake was made entering in the MMSI number, press the CH▼/
CH▲/◄/► key to select “←” or “→”, press the [SELECT] soft key until the
wrong character is selected, then perform step 11.
12. After the nineth letter has been entered, press the [FINISH] soft key.
13. To store the entered data, press the CH▼/
CH▲/◄/► key to select “SAVE”, then press
the [SELECT] soft key.
NAME:
STANDARD---------
987654321
MMSI:
ENTER
INDIVIDUAL DIR.
BACK
Saved
14. To enter another individual address, repeat
steps 6 through 13.
15. Press the CLR key to return to radio operation.
10.5.2 Setting up the Individual Call Reply
This menu item sets up the radio to automatically (default setting) or manually
respond to a DSC individual call requesting you to switch to a working channel
for voice communications. When “Manual” is selected the MMSI of the calling
vessel is shown allowing you to see who is calling. This function is similar to
caller id on a cellular phone.
1. Press the
MENU key to display “MENU”.
DSC SETUP
GM SETUP
BACK
SETUP
WAYPOINT SETUP
CH SETUP
GPS SETUP
CONFIGURATION
SELECT
INDIVIDUAL DIR.
INDIVIDUAL REPLY
INDIVIDUAL ACK.
INDIVIDUAL RING
GROUP DIR.
AUTO POS POLLING
AUTO POS TIME
DSC SETUP
BACK SELECT
AUTO
BACK
DSC SETUP
MANUAL
ENTER
INDIVIDUAL REPLY
2. Press the CH▼/CH▲/◄/► key to select
“SETUP”.
3. Press the [SELECT] soft key, then select
“DSC SETUP” with the CH▼/CH▲ key.
4. Press the [SELECT] soft key, then select
“INDIVIDUAL REPLY” with the CH▼/CH▲
key.
5. Press the [SELECT] soft key.
6. Press the CH▼/CH▲ key to select “AUTO”
or “MANUAL”.
7. Press the [ENTER] soft key to store the
selected setting.
8. Press the CLR key to return to radio opera-
tion.