Standard Horizon HX-870 - Manual (Page 117)

Page 117 HX870
16.10 SBAS (Satellite Based Augmentation System)
This selection enables or disables SBAS such as WAAS, EGNOS and MSAS
as some areas (Australia for example) can have problems with GPS reception
with SBAS enabled. The default setting is “ON”.
1. Press the
MENU key to display “MENU”.
DSC SETUP
GM SETUP
BACK
SETUP
WAYPOINT SETUP
CH SETUP
GPS SETUP
ATIS SETUP
SELECT
UNITS OF MEASURE
PINNING
POSITION INPUT
D-GPS
OUTPUT SENTENCES
LOGGER INTERVAL
LOG ERASE
GPS SETUP
BACK SELECT
ON
ON
OFF
BACK
GPS SETUP
ON
ENTER
D-GPS
2. Select “SETUP” with the CH▼/CH▲/◄/►
key, then press the [SELECT] soft key.
3. Select “GPS SETUP” with the CH▼/CH▲ key,
then press the [SELECT] soft key.
4. Select “D-GPS” with the CH▼/CH▲ key, then
press the [SELECT] soft key.
5. Press the CH▼/CH▲ key to select “ON” or
“OFF”.
6. Press the [ENTER] soft key to store the new
setting.
7. Press the CLR key to return to radio opera-
tion.
16.11 OUTPUT SENTENCES
This selection is used to setup the NMEA output sentences of the HX870.
By default, all the NMEA sentences are turned “OFF”.
1. Press the
MENU key to display “MENU”.
DSC SETUP
GM SETUP
BACK
SETUP
WAYPOINT SETUP
CH SETUP
GPS SETUP
ATIS SETUP
SELECT
UNITS OF MEASURE
PINNING
POSITION INPUT
D-GPS
OUTPUT SENTENCES
LOGGER INTERVAL
LOG ERASE
GPS SETUP
BACK SELECT
ON
ON
GLL
BACK
GPS SETUP
GGA
GSA
GSV
RMC
ENTER
OUTPUT SENTENCES
ON
ON
2. Select “SETUP” with the CH▼/CH▲/◄/►
key, then press the [SELECT] soft key.
3. Select “GPS SETUP” with the CH▼/CH▲ key,
then press the [SELECT] soft key.
4. Select “OUTPUT SENTENCES” with the CH▼/
CH▲ key, then press the [SELECT] soft key.
5. Press the CH▼/CH▲ key to select the
desired sentence type, then press the
[SELECT] soft key.
6. Press the CH▼/CH▲ key to select “ON” or
“OFF”.
7. Press the [ENTER] soft key to save the new
setting.
8. Repeat steps 5 through 7 to set the other sentences.
9. Press the CLR key to return to radio operation.