Standard Horizon HX-870 - Manual (Page 52)

Page 52 HX870
10.5.6 Setting up the Individual Call Ringer
When an individual call is received the radio’s default setting will produce a
ringing sound for 2 minutes. This selection allows the individual call ringer time
to be changed.
1. Press the
MENU key to display “MENU”.
DSC SETUP
GM SETUP
BACK
SETUP
WAYPOINT SETUP
CH SETUP
GPS SETUP
CONFIGURATION
SELECT
INDIVIDUAL DIR.
INDIVIDUAL REPLY
INDIVIDUAL ACK.
INDIVIDUAL RING
GROUP DIR.
AUTO POS POLLING
AUTO POS TIME
DSC SETUP
BACK SELECT
2min
BACK
DSC SETUP
5sec
10sec
15sec
ENTER
INDIVIDUAL RING
2. Press the CH▼/CH▲/◄/► key to select
“SETUP”, then press the [SELECT] soft key.
3. Select “DSC SETUP” menu with the CH▼/
CH▲ key.
4. Press the [SELECT] soft key, then select
“INDIVIDUAL RING” with the CH▼/CH▲
key.
5. Press the [SELECT] soft key.
6. Press the CH▼/CH▲ key to select ringing
time of individual calls.
7. Press the [ENTER] soft key to store the
selected setting.
8. Press the CLR key to return to radio opera-
tion.
The HX870 has the capability to turn off the individual call ringer.
1. Press the MENU key to display “MENU”.
DSC SETUP
GM SETUP
BACK
SETUP
WAYPOINT SETUP
CH SETUP
GPS SETUP
CONFIGURATION
SELECT
GROUP DIR.
AUTO POS POLLING
AUTO POS TIME
CH SWITCH TIMER
NO ACT TIMER
POS FIX WAIT
DSC BEEP
DSC SETUP
BACK SELECT
INDIVIDUAL
BACK
DSC SETUP
GROUP
ALL SHIPS
POS REQUEST
POS REPORT
SELECT
DSC BEEP
ON
ON
ON
ON
ON
OFF
BACK
DSC BEEP
ON
ENTER
INDIVIDUAL
2. Press the CH▼/CH▲/◄/► key to select
“SETUP”, then press the [SELECT] soft key.
3. Select “DSC SETUP” menu with the CH▼/
CH▲ key.
4. Press the [SELECT] soft key, then select
“DSC BEEP” with the CH▼/CH▲ key.
5. Press the [SELECT] soft key.
6. Press the CH▼/CH▲ key to select “INDI-
VIDUAL ”, then press the [SELECT] soft key.
7. Press the CH▼/CH▲ key to select “OFF”.
8. Press the [ENTER] soft key to store the
selected setting.
9. Press the CLR key to return to radio opera-
tion.
To re-enable the ringer tone, repeat the above procedure, pressing the CH▼/
CH▲ key to select “ON” in step 7 above.