Standard Horizon HX-870 - Manual (Page 112)

Page 112 HX870
15.11 DSC BEEP
This feature allows the alarm beeps to be turned on or off when a DSC call
is received. The DSC calls that can be customized are: individual, group, all
ships, position request, and position report.
Refer to section “ 10.6.4 Setting up the Group Call Ringer” for details.
15.12 SUMMARY OF THE DSC SETUP MENU
Item Description Default Value
INDIVIDUAL DIR. Enter or edit addresses used for individual
call
−
INDIVIDUAL REPLY Selects a reply to individual call MANUAL
INDIVIDUAL ACK. Selects the message to be sent automati-
cally as an individual call acknowledge-
ment
ENABLE
INDIVIDUAL RING Selects the ringing time when an individual
call or a position request is received
2 min
GROUP DIR. Enter or edit addresses used for group call −
AUTO POS POLLING Selects the AUTO POS POLLING opera-
tion type
AUTO POS REQUEST
AUTO POS TIME Selects the transmission interval of AUTO
POS POLLING signal
30 sec
CH SWITCH TIMER Selects the delay time to move to the
requested channel automatically after
receiving a distress call, All Ship call, or
group call
30 sec
NO ACT (ACTION)
TIMER
Selects the delay time to return to radio
operation automatically after no key press
15 min
POS FIX WAIT Sets the maximum wait time to obtain posi-
tion information when receiving a distress
call, POS Report call, or acknowledgement
to POS request call
15 sec
DSC BEEP Turns on or off the audible alarm when
receiving a DSC call
Indivi.: On
All Ship: On
Group: On
POS RQ.: Off
POS RP.: On
Geog.: On
Polling: Off
Test Call: Off