Standard Horizon HX-870 - Manual (Page 71)

Page 71 HX870
10.10.3 Selecting Vessels to be Automatically Polled
NOTE
The radio uses the individual directory to select vessels to be auto-
matically polled. Refer to section “ 10.5.1 Setting up the Individual
/ Position Call Directory” and to enter MMSI of vessels you want to
poll before proceeding.
1. Press the MENU key to display “MENU”,
select “DSC CALL” with the CH▼/CH▲/◄/►
key, then press the [SELECT] soft key.
DIST ALERT MSG
POLLING
BACK
DSC CALL
AUTO POS POLLING
DSC LOG
DSC TEST
DSC LOOP BACK
SELECT
ACTIVATION
SELECTED ID
AUTO POS POLLING
BACK SELECT
000000000
AUTO POS POLLING
BACK SELECT DELETE
SELECTED ID
KAREN
BOB
366901254
Horizon-1
Standard
Horizon-2
USCG
INDIVIDUAL DIR.
BACK ENTER
MEMORY
KAREN
AUTO POS POLLING
BACK SELECT DELETE
SELECTED ID
2. Press the CH▼/CH▲ key to select “AUTO
POS POLLING ”, then press the [SELECT]
soft key.
3. Press the CH▼/CH▲ key to select the
“SELECT ID”, then press the [SELECT] soft
key.
4. The radio will show a blank row highlighted
when you select the vessel for the first time.
Press the [SELECT] soft key.
5. The radio will show the vessels programmed
in the individual directory. Press the CH▼/
CH▲ key to select the desired vessel and
press the [ENTER] soft key.
6. For more entries, press the CH▼/CH▲ key
to select a blank row, press the [SELECT]
soft key, then perform step 5.
7. When finished, press the CLR key to exit to
the radio mode.