Standard Horizon HX-870 - Manual (Page 111)

Page 111 HX870
15.9 NO ACT (ACTION) TIMER
If no key is pressed during the “MENU” or “DSC CALL” screen, the HX870 will
automatically return to radio operation.
The default selection is 15 minutes.
1. Press the
MENU key to display “MENU”.
DSC SETUP
GM SETUP
BACK
SETUP
WAYPOINT SETUP
CH SETUP
GPS SETUP
CONFIGURATION
SELECT
INDIVIDUAL ACK.
INDIVIDUAL RING
GROUP DIR.
AUTO POS POLLING
AUTO POS TIME
CH SWITCH TIMER
NO ACT TIMER
DSC SETUP
BACK SELECT
1min
BACK
DSC SETUP
5min
3min
10min
15min
ENTER
NO ACT TIMER
2. Select “SETUP” with the CH▼/CH▲/◄/►
key, then press the [SELECT] soft key.
3. Select “DSC SETUP” with the CH▼/CH▲ key,
then press the [SELECT] soft key.
4. Select “NO ACT TIMER” with the CH▼/CH▲
key, then press the [SELECT] soft key.
5. Press the CH▼/CH▲ key to select the
desired time, then press the [ENTER] soft
key.
6. Press the CLR key to return to radio opera-
tion.
15.10 WAIT TIME FOR POSITION FIX
This menu allows you to select the maximum wait time till obtaining a position
information when receiving a distress call, POS Report call, or acknowledge-
ment to POS request call.
The default selection is 15 seconds.
1. Press the
MENU key to display “MENU”.
DSC SETUP
GM SETUP
BACK
SETUP
WAYPOINT SETUP
CH SETUP
GPS SETUP
CONFIGURATION
SELECT
INDIVIDUAL RING
GROUP DIR.
AUTO POS POLLING
AUTO POS TIME
CH SWITCH TIMER
NO ACT TIMER
POS FIX WAIT
DSC SETUP
BACK SELECT
15sec
BACK
DSC SETUP
1min
30sec
1.5min
2min
ENTER
POS FIX WAIT
2. Select “SETUP” with the CH▼/CH▲/◄/►
key, then press the [SELECT] soft key.
3. Select “DSC SETUP” with the CH▼/CH▲ key,
then press the [SELECT] soft key.
4. Select “POS FIX WAIT” with the CH▼/CH▲
key, then press the [SELECT] soft key.
5. Press the CH▼/CH▲ key to select the
desired time, then press the [ENTER] soft
key.
6. Press the CLR key to return to radio opera-
tion.