Standard Horizon HX-870 - Manual (Page 116)

Page 116 HX870
16.8 UNITS OF MEASURE
This section allows you to set the speed, distance and altitude units.
1. Press the
MENU key to display “MENU”.
DSC SETUP
GM SETUP
BACK
SETUP
WAYPOINT SETUP
CH SETUP
GPS SETUP
ATIS SETUP
SELECT
POWER SAVE
DIRECTION
LOCATION FORMAT
TIME OFFSET
TIME AREA
TIME FORMAT
UNITS OF MEASURE
GPS SETUP
BACK SELECT
SPEED
BACK
GPS SETUP
DISTANCE
ALTITUDE
kts
nm
ft
SELECT
UNITS OF MEASURE
2. Select “SETUP” with the CH▼/CH▲/◄/►
key, then press the [SELECT] soft key.
3. Select “GPS SETUP” with the CH▼/CH▲ key,
then press the [SELECT] soft key.
4. Select “UNITS OF MEASURE” with the CH▼/
CH▲ key, then press the [SELECT] soft key.
5. Press the CH▼/CH▲ key to select the item
you want to set.
6. Press the [SELECT] soft key.
7. Press the CH▼/CH▲ key to select the unit.
8. Press the [ENTER] soft key to store the new
setting.
9. Press the CLR key to return to radio operation.
16.9 PINNING
This selection is used to enable or disable position updates when the vessel
is not underway. The default setting is “OFF”.
1. Press the
MENU key to display “MENU”.
DSC SETUP
GM SETUP
BACK
SETUP
WAYPOINT SETUP
CH SETUP
GPS SETUP
ATIS SETUP
SELECT
UNITS OF MEASURE
PINNING
POSITION INPUT
D-GPS
OUTPUT SENTENCES
LOGGER INTERVAL
LOG ERASE
GPS SETUP
BACK SELECT
ON
ON
OFF
BACK
GPS SETUP
ON
ENTER
PINNING
2. Select “SETUP” with the CH▼/CH▲/◄/►
key, then press the [SELECT] soft key.
3. Select “GPS SETUP” with the CH▼/CH▲ key,
then press the [SELECT] soft key.
4. Select “PINNING” with the CH▼/CH▲ key,
then press the [SELECT] soft key.
5. Press the CH▼/CH▲ key to select “ON” or
“OFF”.
ON
: When pinning is turned on, the HX870
will not update its position unless the
vessel travels over 10Ft.
OFF : When the vessel is underway or stopped, the HX870 continuously
updates its position. This improves accuracy of the position fix.
6. Press the [ENTER] soft key to save the new setting.
7. Press the CLR key to return to radio operation.