Standard Horizon HX-870 - Manual (Page 70)

Page 70 HX870
10.10 AUTO POS POLLING
The HX870 has the capability to automatically track seven vessels programmed
into the individual directory, or to automatically send your position information
to the programmed stations.
10.10.1 Setting up the Polling Operation
1. Press the MENU key to display “MENU”.
DSC SETUP
GM SETUP
BACK
SETUP
WAYPOINT SETUP
CH SETUP
GPS SETUP
CONFIGURATION
SELECT
INDIVIDUAL DIR.
INDIVIDUAL REPLY
INDIVIDUAL ACK.
INDIVIDUAL RING
GROUP DIR.
AUTO POS POLLING
AUTO POS TIME
DSC SETUP
BACK SELECT
AUTO POS REQUEST
BACK
DSC SETUP
AUTO POS REPORT
ENTER
AUTO POS POLLING
2. Press the CH▼/CH▲/◄/► key to select
“SETUP”, then press the [SELECT] soft key.
3. Select “DSC SETUP” menu with the CH▼/
CH▲ key.
4. Press the [SELECT] soft key, then select
“AUTO POS POLLING” with the CH▼/CH▲
key.
5. Press the [SELECT] soft key.
6. Press the CH▼/CH▲ key to select the
desired operation (AUTO POS REQUEST
and AUTO POS REPORT), and press the
[ENTER] soft key.
7. Press the CLR key to return to radio opera-
tion.
10.10.2 Setting up the Polling Time Interval
1. Press the MENU key to display “MENU”.
DSC SETUP
GM SETUP
BACK
SETUP
WAYPOINT SETUP
CH SETUP
GPS SETUP
CONFIGURATION
SELECT
INDIVIDUAL DIR.
INDIVIDUAL REPLY
INDIVIDUAL ACK.
INDIVIDUAL RING
GROUP DIR.
AUTO POS POLLING
AUTO POS TIME
DSC SETUP
BACK SELECT
30sec
BACK
DSC SETUP
1min
2min
3min
5min
ENTER
AUTO POS TIME
2. Press the CH▼/CH▲/◄/► key to select
“SETUP”, then press the [SELECT] soft key.
3. Select “DSC SETUP” menu with the CH▼/
CH▲ key.
4. Press the [SELECT] soft key, then select
“AUTO POS TIME” with the CH▼/CH▲ key.
5. Press the [SELECT] soft key.
6. Press the CH▼/CH▲ key to select the
desired interval time (30 second, 1, 2, 3, and
5 minutes) and press the [ENTER] soft key.
7. Press the CLR key to return to radio opera-
tion.