Standard Horizon HX-870 - Manual (Page 106)

Page 106 HX870
14.11.2 Setting the VOX Level
1. Press the MENU key to display “MENU”.
DSC SETUP
GM SETUP
BACK
SETUP
WAYPOINT SETUP
CH SETUP
GPS SETUP
ATIS SETUP
SELECT
PRIORITY CH
SUB CH
CH NAME
NOISE CANCEL
VOX
VOX LEVEL
VOX DELAY
CH SETUP
BACK SELECT
VOX LEVEL
2
CH SETUP
BACK ENTER
2. Select “SETUP” with the CH▼/CH▲/◄/►
key, then press the [SELECT] soft key.
3. Select “CH SETUP” with the CH▼/CH▲ key,
then press the [SELECT] soft key.
4. Select “VOX LEVEL” with the CH▼/CH▲ key,
then press the [SELECT] soft key.
5. Press the CH▼/CH▲ key to select the
desired active level. The level can be set
from “0” to “4” (“2” is default).
6. Press the [ENTER] soft key to store the new
setting.
7. Press the CLR key to return to radio operation.
NOTE
During setup the VOX level can be seen directly by speaking into the
microphone while the VOX operation is enabled.
14.11.3 Setting the VOX Delay Time
1. Press the MENU key to display “MENU”.
DSC SETUP
GM SETUP
BACK
SETUP
WAYPOINT SETUP
CH SETUP
GPS SETUP
ATIS SETUP
SELECT
PRIORITY CH
SUB CH
CH NAME
NOISE CANCEL
VOX
VOX LEVEL
VOX DELAY
CH SETUP
BACK SELECT
0.5sec
BACK
CH SETUP
1.0sec
1.5sec
2.0sec
3.0sec
ENTER
VOX DELAY
2. Select “SETUP” with the CH▼/CH▲/◄/►
key, then press the [SELECT] soft key.
3. Select “CH SETUP” with the CH▼/CH▲ key,
then press the [SELECT] soft key.
4. Select “VOX DELAY” with the CH▼/CH▲ key,
then press the [SELECT] soft key.
5. Press the CH▼/CH▲ key to select the
desired delay time from “0.5sec”, “1.0sec”,
“1.5sec”, “2.0sec” or “3.0sec”.
6. Press the [ENTER] soft key to store the new
setting.
7. Press the CLR key to return to radio operation.